|
About Us
Maxim
Silencers, Inc. is the manufacturer of MaximŽ Silencer Products. At
Maxim's Stafford, Texas manufacturing plant a complete range of noise
control, waste heat recovery and emission control equipment is offered
under the Maxim trade name.
Maxim
engineering capability is supported by such capabilities as Finite
Element Analysis, 3-D solid modeling and by state-of-the-art noise
testing and analysis equipment. New noise testing equipment puts Maxim
Silencers on the leading edge of modern technology by providing in-house
testing capability of new and existing Maxim Silencer products and
provides capability for field analysis of noise problems to provide real
solutions to real world noise concerns. Maxim offers a wide range of
Maxim Silencer products
Maxim Silencer
Products offers silencers and mufflers designed to meet the most
demanding applications and most strenuous requirements for engine or
turbine exhaust noise control, silencing of high pressure vent
applications, economical recovery of waste heat or effective control of
exhaust emissions.
For all your silencer needs, contact Maxim.
|
 |
|
Maxim manufacturing plant
located in Stafford, Texas. |
|
Product Overview |
|
 |
|
Vent Silencer - 94" VT-3 for steam service
in Mexico |
Silencers
Chambered
silencers (or mufflers) for reciprocating gas or diesel engines are
available to meet most engine exhaust requirements for dry exhaust
systems or wet exhaust systems used in many marine applications.
Silencers are available which include features such as spark
arresting capability, low pressure drop designs and absorptive
designs and are extremely effective mufflers of the loud exhaust
noise associated with internal combustion engines.
Vent
silencers are highly effective absorptive design noise mufflers.
Maxim vent silencers employ the use of internal acoustically packed
panels to suppress noise generated by the high velocity discharge of
air, gas or steam to atmosphere through process vents, relief valve
discharges, blow off or blow down processes, compressor start ups,
ejector discharges or similar applications resulting in
depressurization of a system.
Other
Maxim silencer applications may use chambered muffler designs or
acoustically packed silencer designs or a combination of both to
meet noise control applications for blowers and vacuum pumps. When
mufflers are used in a closed loop pressurized system such as may be
found in compressor station intakes or discharges the use of
silencers designed and stamped to meet ASME Code may be required. |
Heat Recovery
Maxim's waste heat recovery silencers may be used in
applications where engine exhaust heat, which would otherwise be
lost, may be utilized to economically produce hot water or steam.
Maxim heat recovery units are highly efficient in capturing waste
exhaust heat while providing a high degree of silencing of the
engine exhaust noise. Wide ranges of models are offered for gas or
diesel reciprocating engines and for gas turbine applications.
|
 |
|
30" heat recovery unit
for severe conditions in Saudi Arabia |
Catalytic Units
Control of exhaust emissions can be obtained by using
Maxim catalytic silencers. Catalytic silencers are available to
achieve guaranteed reductions of NOx, CO and non-methane
hydrocarbons in engine exhaust applications. Catalytic silencers are
available in standard models for catalytic reduction with effective
silencing or catalytic reduction with critical grade silencing to
meet most local regulations for emissions reductions and silenced
noise level requirements.
|
 |
|
MTC Catalytic Silencer
Installation |
|
|
Maxim Silencers, Inc. , 10635 Brighton Lane, Stafford, Texas, 77477
Phone: 832-554-0980 Fax: 832-554-0990 E-mail:
Web:
http://www.maximsilencers.com |
