Phone: (832) 554-0980

Fax: (832) 554-0990

contact us | home

Heat Recovery

MFT

Features Sizes – 2” to 30” exhaust connections. Design Pressure – 165 psi standard, other available. Built to ASME VIII Div. 1 requirements. Water tube construction for minimum warm-up time Effective engine silencer Removable tube bundle Removable top chamber for inspection and maintenance Various support arrangements available Various exhaust connection arrangements available to facilitate installation Uses Steam generation Hot water heating Description The MFT is a combination water tube heat recovery unit and chamber type silencer used primarily on the exhaust of reciprocating engines. It can be used in combination with a model HSS steam separator to produce saturated steam or used alone as a liquid heater. The MFT must be installed vertically when used as a steam generator. As a liquid heater, it can be installed either vertically or horizontally.

 

MBT

Features Sizes – 12” to 40” exhaust gas connections Design Pressure – 165 psig standard, other available Built to ASME VIII Div. 1 requirements Fire tube construction Effective engine silencer Vertical or horizontal configurations available Standard Expansion joint accommodates differences in tube and shell temperatures. Special configurations allow cold, dry start-up. Steam generators have integral steam space and separator Various exhaust connection arrangements accommodate most installation requirements Uses Steam generation Water heating Description The MBT is a fire tube type heat recovering unit that can be supplied in various configurations. It is used primarily on large reciprocating engines and those that use heavy fuels.

HSS
Features Sizes – 1,000 lbs/hr to 50,000 lbs/hr nominal steam rate Design Pressure – 20 and 150 psi standard, other available Built to ASME I or VIII Div. 1 requirements Available with or without controls Separation efficiency – 98% standard, other available Available with or without insulation Uses Steam separation from a water-steam input stream
Description The HSS is an impact-type separator designed for use with MAXIM® Heat Recovery Equipment such as the MFT and GTW and ebulliently cooled reciprocating engines. It separates the steam from the mixture entering the unit; serves as a liquid reservoir, level control point, and a blow down point for system contaminants; and mounts system safety devices. Standard trim components include: Liquid level controller Safety valve Liquid level gauge Surface blow-off valve Automatic air venting Liquid drain valve Pressure indicator High and low level switches

TRP

Features Sizes – 3” to 18” exhaust connections Design Pressure – 20 psi Built to ASME VIII Div. 1 requirements Water tube construction for minimum warm-up time Effective engine silencer Integral steam separator Removable tube bundle Uses Steam Generation Description The TRP is a combination water tube heat recovery unit, steam separator, and chamber-type engine silencer. It is used primarily on ebullient cooled reciprocating engines to recover both exhaust and jacket water heat in the form of low pressure steam.

 

WVS/WHS
Features Sizes – 3” to 30” exhaust gas connections Design Pressure – 75 psi standard, other available Built to ASME VIII Div. 1 requirements Annular water jacket (tubeless construction) Effective engine silencer Removable covers for access to gas passages for inspection and cleaning Various exhaust connection arrangements available to facilitate installation Various support arrangements available Non-pressure parts of low alloy weathering steel available for sewage gas fueled engines Uses Water heating
Description The WVS/WHS is a combination annular jacket (tubeless) heat recovery unit and chamber-type silencer used primarily on the exhaust of a reciprocating engine.  The WVS is designed for vertical installation while the WHS is installed horizontally

 

BVS

Features Sizes – 3” to 30” exhaust gas connections Design Pressure – 20 psi standard, other available Built to ASME VIII Div. 1 requirements Annular water jacket (tubeless construction) Effective engine silencer Removable cover for access to gas passages for inspection and cleaning Internal steam separator Various exhaust connection arrangements available to facilitate installation Various support arrangements available Non-pressure parts of low alloy weathering steel available for sewage gas fueled engines Uses Steam generation Description The BVS is a combination annular jacket (tubeless) heat recovery unit and chamber-type silencer used primarily on the exhaust of a reciprocating engine. It has an internal steam separator for producing saturated steam and must be installed vertically.

 

GTW
Features Sizes – 15,000 lbs/hr to 225,000 lbs/hr nominal exhaust gas flowrate Design Pressure – 150 psi standard, other available Built to ASME VIII Div. 1 requirements Water tube construction for minimum warm-up time Modular design to suit system operating requirements Compact size Low gas side pressure drop Internal diverter valve and bypass duct available Supplementary silencers available Available in either a horizontal or vertical gas flow configuration Uses Steam Generation Hot water heating
Description The GTW is a water tube heat recovery unit used primarily on the exhaust of a gas turbine.  Modular design allows the unit to be tailored to the heat transfer and pressure drop requirements of each installation. It can be used in combination with a model HSS steam separator to produce saturated steam or used alone as a liquid heater.  When used as a liquid heater, the modules can be arranged in either a parallel or series configuration. The optional internal diverter valve allows operation with variable system heat requirements. Vertical or horizontal gas flow arrangements are available. The GTW provides a nominal amount of noise reduction and supplementary silencers are usually required to meet facility noise requirements.

 

SOH
Features Sizes available to suit application requirements Design Pressure – 150 psi standard, other available Built to ASME VIII Div. 1 requirements Low gas side pressure drop Optional internal gas diverter valve and bypass duct available Supplementary silencers available Available with various gas inlet and outlet arrangements Removable covers for access to return bends and tubewelds Uses Water heating Heat transfer fluid heating
Description The SOH is a counter crossflow-type heat recovery unit. It is used primarily on the exhaust of a gas turbine for fluid heating. It is available in various sizes to suit system pressure drop, heat transfer, and fluid requirements. The SOH provides a nominal amount of noise reduction and supplementary silencers are usually required to meet facility noise requirements.